PRODUCTS

1. overview
The rain gauge is a resolution of artificial observation type rainfall 1mm, its bearing the rain mouth assembly is installed on the outdoor storage bottle placed indoors, for artificial precipitation observation, which can be conveniently used for heavy rain and rainstorm observation and possible flash floods, landslides warning.

2. composition and working principle
The rainfall device by the 200mm caliber standard bearing the rain mouth 1, 2 mesh, stainless steel outer cylinder 3, stainless steel mounting bracket assembly 4, water pipe 5, water pipe fixing clips 6, 7, a water storage bottle cover on the 8 global level (see Figure 1).
The rain mouth assembly is mounted on the roof, or outdoor storage bottle installed in the interior of precipitation when bearing the rain mouth to undertake water through the filter, water pipe into the water storage bottle, the effective volume of water storage bottle for 200mm precipitation, the scale on the bottle is 1mm precipitation, can be conveniently used for artificial observation and precipitation due to heavy rainfall flash floods triggered landslides warning. After each rainfall, only the water in the water bottle is poured out, and then the water pipe is re inserted into the water bottle to observe the next precipitation process.
This type of plastic alloy bearing rain gauge is port and a filter screen made of imported high strength material manufacturing, using imported high strength PC material storage bottle, the outer cylinder and bearing manufacturing fasteners are stainless steel material, instrument appearance and durable.

3. main technical parameters
Size of 3.1 rain mouth: diameter: 200 (0 ~ 0.6) mm;
Cutting edge angle: 40~450;
Calibration value of 3.2 water bottle: 1mm precipitation;
3.3 water pipe size: diameter 10mm, length (standard) 5m;
Size of 3.4 rain cylinder: 208mm * 300mm;
3.5 use environment: -10 ~ 75; relative humidity; less than 90% (40).